|
|
The L’EQUIP™ Mini Pulp Ejector Juicer is designed to be easy to use and easy to clean. The Model 110.5 features the same patented pulp ejection system created for the original Model 221 Pulp Ejector Juicer. These features, along with the computer-controlled motor and distinctive design truly set the Mini Pulp Ejector Juicer above any other juicer on the market.
|
 |
|
Place the juicebowl on top of the motor base. Guide ring located on the underside of the juice bowl should rest in accompanying guide slot on top of the motor base.
|
|
 |
|
Set the blade/basket on the hub in the center of the juice bowl, and press down until it feels snug.
|
|
 |
|
Gently rotate the blade/basket to ensure that it turns freely. If initially it failed to seat, this should slip it into place. Double check by pressing down and spinning it again.
|
|
 |
|
Place the clear cover over the juice bowl with the large pulp ejection opening toward the back of the juicer.
|
|
 |
|
Place the tops of the clamps on the respective slots on the cover, leaving the clamp hinges resting out. Press the bottom of the clamps in, until they snap snugly into place.
|
|
 |
|
Place the pulp basket under the pulp spout behind the juicer.
|
|
|
|
|
|
L'Equip Europe Ltd, Unit 5 Harrier Court, Airfield Business Park, Elvington, York, YO41 4EA, UK
Tel: +44 (0)1904 757075; Fax +44 (0)1904 757071
Copyright ©1999-2006 L'Equip Europe Ltd. All Rights Reserved.
|
|
Features & Photos
